Biosorption of chlorophenoxy acid herbicides from aqueous solution by using low-cost agricultural wastes

dc.authoridDUNDAR, ABDURRAHMAN/0000-0002-7930-1054
dc.authoridOkumus, Veysi/0000-0002-5505-2700
dc.authoridKilinc, Ersin/0000-0001-5223-9919
dc.contributor.authorOkumus, Veysi
dc.contributor.authorCelik, K. Serdar
dc.contributor.authorOzdemir, Sadin
dc.contributor.authorDundar, Abdurrahman
dc.contributor.authorKilinc, Ersin
dc.date.accessioned2024-12-24T19:28:26Z
dc.date.available2024-12-24T19:28:26Z
dc.date.issued2015
dc.departmentSiirt Üniversitesi
dc.description.abstractThe potential biosorption abilities of apple shell (AS), orange peel (OP), banana peel (BP), and millet waste (MW) as a bio-waste material to remove 2,4-dichlorophenoxy acetic acid (2,4-D), 2,4-dichlorophenoxy propanoic acid (2,4-DP), and 2,4-dichlorophenoxy butyric acid (2,4-DB) from aqueous solution were investigated in batch condition. Optimum biosorption conditions were determined as a function of contact time, pH of the solution, amount of biomass, and initial pesticide concentrations. The concentrations of the pesticides in the remaining solutions were simultaneously determined by high performance thin layer chromatography. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the pesticides by agricultural wastes. The experimental adsorption data were fitted to Langmuir adsorption models (r(2)>0.99). It was found that adsorption of 2,4-DP was higher for all biosorbent. The highest maximum adsorption capacities of 2,4-DP were found as 40.08, 22.71, 33.26, and 45.45mg/g, respectively, for AS, OP, BP, and MW. Maximum adsorption capacity was obtained for 2,4-D as OP>MW>BP>AS, 2,4-DP as MW>AS>BP>OP, and 2,4-DB as OP>AS>BP>MW. From the results, it can be said that MW was an effective biosorbent for removal of 2,4-DP and OP was an effective biosorbent for removal of 2,4-D and 2,4-DB through the studied pesticides. Optimum biosorption conditions were determined as 60min of contact time, 100mg of biomass, AS at pH 6.0, OP at pH 6.0, MW at pH 7.0, and BP at pH 7.0. FT-IR was employed to understand the surface properties of biosorbents. According to the results, agricultural wastes have high adsorption capacity.
dc.identifier.doi10.1080/19443994.2014.961562
dc.identifier.endpage1907
dc.identifier.issn1944-3994
dc.identifier.issn1944-3986
dc.identifier.issue7
dc.identifier.scopus2-s2.0-84945459893
dc.identifier.scopusqualityQ3
dc.identifier.startpage1898
dc.identifier.urihttps://doi.org/10.1080/19443994.2014.961562
dc.identifier.urihttps://hdl.handle.net/20.500.12604/7050
dc.identifier.volume56
dc.identifier.wosWOS:000362880500021
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Inc
dc.relation.ispartofDesalination and Water Treatment
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241222
dc.subjectBiosorption
dc.subjectChlorophenoxy acid herbicide
dc.subjectChromatography
dc.subjectAgricultural waste
dc.titleBiosorption of chlorophenoxy acid herbicides from aqueous solution by using low-cost agricultural wastes
dc.typeArticle

Dosyalar