Determination optimum ni concentration in Zn2SnO4/Ni-Doped Sb2S3 thin films with different ni concentrations using incident photons to current efficiency (IPCE) and current density (J)-voltage (V) measurements
[ X ]
Tarih
2018
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
S.C. Virtual Company of Phisics S.R.L
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this present study, Ni-doped Sb2S3 thin films with different Ni concentrations were synthesized on Zn2SnO4 coated with FTO conductive glasses by CBD method at room temperature using Ni as the dopant material. The concentration of Ni to be doped during the experiment was determined as 0.25%, 0.5%, 0.75%, and 1%. In the first stage of this study, incident photons to current efficiency (IPCE) and current density (J)-voltage (V) measurements were conducted to investigate the photovoltaic properties of Zn2SnO4 /Ni-doped Sb2S3 thin films with different Ni concentrations for the first time. The main reason for performing IPCE and J-V measurements is to determine Ni-doped Sb2S3 thin film with optimum Ni concentration with the best solar cell performance. It was found that Sb2S3: Ni(0.75%) thin film has the highest IPCE (%) and power conversion efficiency values compare to other Ni concentrations. © 2018, S.C. Virtual Company of Phisics S.R.L. All rights reserved.
Açıklama
Anahtar Kelimeler
Characterization, Doping, Photovoltaic, Synthesis, Thin film
Kaynak
Chalcogenide Letters
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
15
Sayı
10
