Effect of pressing temperature on the wear resistance of a Co-based Cr-Mo powder alloy produced by hot pressing

Basit Öğe Kaydı
dc.contributor.authorSomunkiran, Ilyas
dc.contributor.authorBalin, Ahmet
dc.date.accessioned2024-12-24T19:30:59Z
dc.date.available2024-12-24T19:30:59Z
dc.date.issued2016
dc.departmentSiirt Üniversitesi
dc.description.abstractIn this study, Co-based Cr-Mo powder alloy was produced at different pressing temperatures by using hot pressing technique and abrasive wear behaviors of the produced specimens were examined. Produced specimens were exposed to abrasive wear experiment using block on disc wear test device by applying a load of 50 N with 100-mesh SiC abrasive paper. Each specimen was investigated at 25, 50, 75 and 100 m. At the end of the experiment, abrasive wear results of the specimens were determined by calculating their mass losses. Microstructural properties of the specimens which were produced at different pressing temperatures were investigated by optical and SEM examinations and their wear resistances were examined by abrasive wear experiments. Consequently, it was observed that in Co-based Cr-Mo powder alloy produced by hot pressing technique; as sintering temperature increased, size of neck formations between the powder grains increased, porosity decreased and abrasive wear resistance increased.
dc.identifier.doi10.3139/120.110822
dc.identifier.endpage68
dc.identifier.issn0025-5300
dc.identifier.issue1
dc.identifier.scopus2-s2.0-84956998384
dc.identifier.scopusqualityQ2
dc.identifier.startpage63
dc.identifier.urihttps://doi.org/10.3139/120.110822
dc.identifier.urihttps://hdl.handle.net/20.500.12604/7760
dc.identifier.volume58
dc.identifier.wosWOS:000369177800010
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherCarl Hanser Verlag
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241222
dc.subjectAbrasive wear
dc.subjecthot pressing
dc.subjectsuper alloy
dc.subjectpowder metallurgy
dc.subjectbiocompatible alloys
dc.titleEffect of pressing temperature on the wear resistance of a Co-based Cr-Mo powder alloy produced by hot pressing
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu