THE APPLICATION OF THE TAGUCHI METHOD FOR OPTIMIZING THE COMPRESSION STRENGTH OF PLA SAMPLES PRODUCED USING FDM

Basit Öğe Kaydı
dc.contributor.authorTunçel, Oğuz
dc.contributor.authorBayraklılar, Mehmet Said
dc.date.accessioned2024-12-24T19:16:14Z
dc.date.available2024-12-24T19:16:14Z
dc.date.issued2024
dc.departmentSiirt Üniversitesi
dc.description.abstractIn this study, the Taguchi method was applied to optimize the compressive strength of PLA samples produced using Fused Deposition Modelling (FDM). The study used Taguchi L9 experimental design to optimize three different process parameters (wall thickness, filling pattern, and printing speed). S/N ratios and ANOVA methods were used to analyze the experiments. The results of the experiments using the Taguchi technique were analyzed according to S/N ratios and the parameter levels with the best results were determined. The best levels for wall thickness, filling pattern, and print speed parameters were determined and the effects of these parameters were analyzed. It was concluded that wall thickness was the most effective parameter and filling pattern and print speed were less effective. ANOVA analysis confirmed the influence of the parameters on the compressive strength. It was observed that wall thickness contributed the most (70.20%) and filling pattern contributed the second most (29.11%).
dc.identifier.doi10.17780/ksujes.1365534
dc.identifier.endpage140
dc.identifier.issn1309-1751
dc.identifier.issue1
dc.identifier.startpage133
dc.identifier.trdizinid1227387
dc.identifier.urihttps://doi.org/10.17780/ksujes.1365534
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1227387
dc.identifier.urihttps://hdl.handle.net/20.500.12604/4302
dc.identifier.volume27
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofKSÜ Mühendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241222
dc.subjectPla
dc.subjecttaguchi
dc.subjectcompression strength
dc.subjectanova
dc.subjectFdm
dc.titleTHE APPLICATION OF THE TAGUCHI METHOD FOR OPTIMIZING THE COMPRESSION STRENGTH OF PLA SAMPLES PRODUCED USING FDM
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu