Comparison of Mechanical Properties of Samples Fabricated by Stereolithography and Fused Deposition Modelling

Basit Öğe Kaydı
dc.contributor.authorBayraklılar, Mehmet Said
dc.contributor.authorBuldu, Abdulkadir
dc.contributor.authorKoçak, Muhammed Tayyip
dc.contributor.authorÜlkir, Osman
dc.contributor.authorKuncan, Melih
dc.date.accessioned2024-12-24T19:18:26Z
dc.date.available2024-12-24T19:18:26Z
dc.date.issued2023
dc.departmentSiirt Üniversitesi
dc.description.abstractAdditive manufacturing (AM) technology has attracted significant attention with the rapid fabrication of 3D parts for various applications. The two most popular techniques in this technology, Fused Deposition Modelling (FDM) and Stereolithography (SLA), make it possible to produce functional parts with complex shapes quickly and cheaply. Determining the mechanical properties of the parts fabricated by these methods is important in terms of efficient operation in the relevant fields. In this study, forty-five test specimens were fabricated using three different polymer materials (UVR, PLA, and ABS) in SLA and FDM type 3D printers, including tensile, compression, and 3-point bending tests. Samples are printed at a 75% fill rate according to ASTM standards. Experimental studies were carried out to determine the mechanical properties of the samples. Among the samples, the highest strength values in tensile, compression and bending test samples made of UVR material were 60.39 MPa, 127.74 MPa and 118.35 MPa, respectively. In addition to mechanical properties, hardness, and SEM analyses were performed to examine the surface roughness, surface topography, and composition of the samples.
dc.identifier.doi10.55546/jmm.1358963
dc.identifier.endpage491
dc.identifier.issn2717-8811
dc.identifier.issue2
dc.identifier.startpage475
dc.identifier.trdizinid1216345
dc.identifier.urihttps://doi.org/10.55546/jmm.1358963
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1216345
dc.identifier.urihttps://hdl.handle.net/20.500.12604/5124
dc.identifier.volume4
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofJournal of Materials and Mechatronics:A (Online)
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241222
dc.subjectAdditive manufacturing
dc.subjectTensile test
dc.subjectStereolithography
dc.subjectFused deposition modelling
dc.subjectCompression test
dc.subject3-point bending test
dc.titleComparison of Mechanical Properties of Samples Fabricated by Stereolithography and Fused Deposition Modelling
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu