Investigation of The Machinability of AISI 52100 Bearing Steel for Surface Roughness, Tool Life and Temperature Criterions

Basit Öğe Kaydı
dc.authoridCELIK, MAHMUT/0000-0003-4272-1319
dc.authoridCAYDAS, Ulas/0000-0001-6706-1332
dc.contributor.authorCaydas, Ulas
dc.contributor.authorKuncan, Osman
dc.contributor.authorCelik, Mahmut
dc.date.accessioned2024-12-24T19:30:45Z
dc.date.available2024-12-24T19:30:45Z
dc.date.issued2017
dc.departmentSiirt Üniversitesi
dc.description.abstractIn this study, spheroidized AISI 52100 bearing steel was machined in dry and minimum quantity of lubrication (MQL) conditions. After experiments, the average surface roughness (R-a) of samples, tool flank wears (V-B) and tool - chip interface temperature (T) values were measured. The ISO DNMG 150408 - TF and DNGA 150408T IN 23 carbide and ceramic cutting tool materials were used. In the experiments, the depth of cut (a) and tool feed rate (f) factors were fixed, while the cutting speed (V), cutting tool and workpiece materials and machining conditions factors were changed in certain intervals to experimentally explore their relatively effects on the machining responses. Consequently, optimum parameter conditions were determined and evaluated for the economic machining of AISI 52100 bearing steel.
dc.identifier.doi10.2339/2017.20.2.409-417
dc.identifier.endpage417
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue2
dc.identifier.startpage409
dc.identifier.urihttps://doi.org/10.2339/2017.20.2.409-417
dc.identifier.urihttps://hdl.handle.net/20.500.12604/7654
dc.identifier.volume20
dc.identifier.wosWOS:000447836700020
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.language.isotr
dc.publisherGazi Univ
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241222
dc.subjectAISI 52100 Steel
dc.subjectSpheroidization Heat Treatment
dc.subjectTool Life
dc.subjectSurface Roughness
dc.titleInvestigation of The Machinability of AISI 52100 Bearing Steel for Surface Roughness, Tool Life and Temperature Criterions
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu